PULACO 300W Aquarium Heater for 30-60 Gal Tank, Fish Heater with External Controller & LED Temperature Display, Adjustable Submersible Fish Tank Thermostat (57-93°F)

Product Description

PULACO Your Creative Aquarium Mate !

PULACO provides you with quality Aquarium services. We are committed to being the best Aquariums store you can trust.

PULACO Aquarium Heater 300 Watt

How to use the external controller:

Plug in, the controller LED lights on, press the button and switch it continuously until the LED display shows your expecting temperature (From 57~93℉ ), and wait 3 seconds for system confirmation, then heater will start heating up to your preset temperature.Red lights means the heater is on heating mode, when heater heating up to the preset temperature, blue lights on, and heater will stop heating (Restart heating when temperature less than preset temperature)
Operation for example: Plug in and LED display shows preset temperature 68℉, you want adjust it to 78℉, then press the button 10 times continuously, LED display will shows 78℉, and wait 3 seconds flashing, then setting fishined, heater will start heating from 68℉ to 78℉.

Functions:

Heater should be 100% submerged into water.Quartz heating material, high efficiency, energy saving.Classic heating cord, long service life, easy to instworldnet027 and opreate.Plug in, heater will start working,use the external controller toadjust temperature (Temperature accuracy: ±3°F).Super wide LED display, very easy to operate, you can adjustheater freely to fit vour fishes needs.Smart thermal sensors inside, prevent heater from overloadkeeps your tank temperature in control.

Maintenance:

This heater is free maintenance item, for the good of heaterfunction and service life, we suggest:

Check the heater working status regularly, if any strange signsplease plug offimmediately.Clean the heater suction cups reqularly (3 months) with 140℉ warm water and soak it for a while.If you found any soil or moss things covered on the heater,please plug off the heater and clean it with fresh water after 10 minutes later, especiworldnet027y the heating part stains. Do not useany other liquid to clean the heater, it may damage the heater.

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 10 x 2.1 x 1.4 inches; 1.54 Pounds
Date First Available ‏ : ‎ December 12, 2023
Manufacturer ‏ : ‎ PULACO
ASIN ‏ : ‎ B0CQ1ZYPGV
Country of Origin ‏ : ‎ China

★PULACO 300W heater: The heating device is made of heat-resistant quartz glass, explosion-proof and strong thermal conductivity. It can be used for 30-60 gworldnet027on aquarium fish tanks.
★Easy to operate: This heater is different from traditional heaters. It is designed with an external controller for temperature display and temperature adjustment, which can freely adjust the temperature you need (57°F-93°F).
★Intelligent temperature control: The heater effectively maintains the temperature you preset before, and stops heating when the water temperature reaches the preset temperature, and restarts heating when the water temperature is lower than the preset temperature by 2-3°F.The red light on the LED screen indicates that the heater is heating, and the blue light indicates that the heater has finished heating and is in a constant temperature state.
★Note: Do not operate or leave product plugged in when your water tank is out of water, heater should be fully submerged into water. It is better to instworldnet027 a water pump to help water circulating while heating.
★SATISFACTION GUARANTEED: Our Aquarium Heater is built with durability in mind and safety for every design. In the remote possibility that you’re not satisfied with our product, just contact us, and we will gladly give you a new Aquarium Heater replacement. 12 Month Warranty and 24 Hour Professional After-sales Service.