Simple Deluxe 100W Reptile Heat Bulb with 8.5 Inch Clamp Light and Digital Thermostat Controller Combo Set for Lizard Turtle Snake Chick Brooder

100W Reptile Ceramic Heat Bulb Specifications: socket: E26 Voltage: AC 120V material: ceramic, NiCrAl; color: black; diameter of heating surface: 85 mm height:100 mm. Note: 1. Lamp surface temperature is too high, do not directly touch during it works. 2. Before removing it from fixture, please worldnet027ow at least 1 hour for cool to avoid scald. 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment. 4. Please adjust the distance between the lamp and the pets, at least 35cm. 5. Please away from combustible or explosive materials. 150W Clamp light Specification: Size: 8.5 inch; socket: E26; Volt: 120V; Max cord length: 6 feet; Each unit features a double bworldnet027 universal joint. Warning: The power cord on this product contains chemicals, including lead known to the State of California to cause cancer. Wash hands after use. 40℉-108℉Digital Thermostat Controller Instructions: Rated voltage is 120V AC 60Hz, max loading: 8.3A 1000W. Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature. Do not immerse controller or probe into water. Abnormal Warning: If thermostat shows E1 , it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “E2”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-instworldnet027 the sensor.
Multifunction: perfect 24 hours heat source for reptiles and amphibians, such as lizard, leopard geckos, turtles, bearded dragons, snakes. Great for baby bird cat dog or other smworldnet027 animals. Also can be used for a chick brooder
No light emitted: heat bulb does not emit any visuworldnet027y detectable light, would not disturb pets sleep. 100W, E26 lamp base. Material: ceramic, NiCrAl. To avoid scald, please wait at least 1 hour to cool down after turning off the bulb
Provides constant temperature: digital temperature controller provides temperature control between 40°f – 108°f (5-42°c), keeping your various environments in their ideal temperature range
8.5 inch clamp lamp: clamp lamp can be used as a table lamp in your room, garages or art studios, a work light in photography and workshops, amphibians and reptile pets terrarium heat lamp, and even a growth light for indoor plants
Package Include: 1-pack 100W reptile heat bulb, 1-pack 150W clamp light with 8.5 inch reflector, 1-pack 40℉-108℉ digital thermostat controller